UHMWPE/ polyethylene roll
Plastic HDPE/ UHMWPE BELT CONVEYOR ROLLER FEATURE
https://www.gcsconveyor.com/uhmwpepolyethylene-roller-gcs-product/
1. Extremely high wear resistance, super low disunion measure, super stronganti-adhesion capability, can protract belt service time by 1- times
2. No solicitude of conservation during service time
3. Fire resistance, antistatic, bear aging,anti-corrosion of colorful chemical media
4. Super strong mechanical strength can stand repeated impact and vibration
5. Superior sealing property, low noise, low gyration resistance, steady operation, long service life, which is 2-3 times of traditional comber
6. Work in-40 ℃ to 80 ℃ for a long time
7. Light weight, easy installation
UHMWPE loafer comber HDPE trough carrier conveyor comber| GCS
Description
UHMW-PE Roller is short for ultra high molecular weight polyethylene. HDPE is short for high viscosity polyethylene. UHMWPE/ HDPE Roller is a direct polyethylene with a molecular weight further than 3 million comber
The effectiveness of the HDPE comber system provides the result to the environmental challenges of dust, dirt, water, low and high temperatures or operations where there's a large temperature gap between day and night.
Typical operation for the breakers are mines, chases, cement shops, coal- fired power shops, harborage installations. The effectiveness of the HDPE comber system provides the result to the environmental challenges of dust, dirt, water, low and high temperatures or operations where there's a large temperature gap between day and night. The working temperature, with standard oiled factors is defined as between-100 °C and 80 °C. It's possible to reach temperatures outside of this range using special grease, comportments and seals.
HDPE comber loafers for tone cleaning used on the transom to support the belt when the material being conveyed, performs a cleaning action and reduces the tendency of material to deposit itself and stick to the face of the dirty side of the belt. They may be employed on any part of the return belt section in the case of short conveyors. On long sections it's satisfactory to employ these breakers only over to the point where the material doesn't cleave any further to the belt face. These breakers shouldn't be employed as rebuff breakers conterminous to the drive or return cans.
Characteristics of conveying comber
1. High-wear resistance seven times wear resistance than sword, four times than PTFE.
2. High impact resistancetwo times impact resistance than PC, five times than ABS.
3. Tone-lubrication the same as PTFE, better than sword and brass added slicking canvas.
4. Anti-corrosion resistance, stable chemicals property and can endure the erosion of all kinds of sharp medium and organic detergent in certain chimed of temperature and moisture.
5. Non-sticking the smooth face of product hardly affixes other material.
6. Low temperature resistancein (-196), it still has the extension and high tensile strength.
7. Non-toxic and clean property.
To learn more, please click here:
Global Conveyor Supplies Company Limited
评论
发表评论